• Home
  • Water-from-air systems
  • Opportunity & Potential
  • CanDew Products
    • Atmospheric Water Generator (2500 L/d) computer simulations
    • WaterProducer water-from-air system
    • Water-from-Air Greenhouse
    • Preliminary Studies for proposed projects using Water-from-Air and Atmospheric Water Generators
    • 'Classic' Reports for Water-from-Air and Atmospheric Water Generators >
      • Sample Page - WP drinking water plant for Cebu...
  • WFC Series AWGs
    • WFC Series AWGs 60 Hz
    • Replacement Parts for WFC Series AWGs
  • Markets
  • Technical Information
    • Technical Bulletin No. 1 Water-from-Air WaterProducer and Reverse Osmosis Desalination Compared
    • Technical Bulletin No. 2 Water-from-Air WaterProducer Cost, Features, and Benefits
    • Technical Bulletin No. 3 Carbonate Islands with Natural Coolant Resources for the Water-from-Air WaterProducer
    • Technical Bulletin No. 4 Comparing the Water-from-Air WaterProducer-Greenhouse to the Seawater Greenhouse
    • Technical Bulletin No. 5 Environmental impact of widespread use of drinking-water-from-air systems
    • Technical Bulletin No. 6 Potential and limitations of water-from-air systems for horticulture in greenhouses at four tropical sites
    • Water-from-Air International Lexicon
    • Water-from-Air Book
  • Countries with 60 Hz electrical services
  • Management
  • Contact Us
    • Privacy Policy
  • CanDew Blog
  • Global Water Partnership
  • CanDew Shop
Canadian Dew Technologies Inc.
(604) 985-3720

WFC Series Atmospheric Water Generators (60 Hz)—Made in USA

• Specifications for Atmospheric Water Generators (60 Hz)  • Pricelist for Atmospheric Water Generators (60 Hz)  • Pricelist for Replacement Parts

Picture of WFC-1 Atmospheric Water Generator for 35 L/day
WFC-1 Atmospheric Water Generator for 38 L/day (10 US gallons/day)
Picture of plan and elevation of the 1-Ton (cooling capacity) WFC-1 atmospheric water generator
Plan and elevation (dimensions in inches) of the 1-Ton (cooling capacity) WFC-1 atmospheric water generator
Features & Specifications WFC-1
System
  • Water production at ambient 29.4°C (85°F); 75% RH: 38 L/day (10  US gallons/day)
  • Airflow 0.14 cubic metres per second (300 cfm)
  • 3.5 kW (1 Ton) total cooling (refrigeration) capacity
  • Refrigerant: R-410A
  • Air filter: Electrostatic, 25.4 mm (1 inch) thick
  • Air filter rack: Aluminum
  • Machine exterior material and coating: Stainless steel and polished aluminum
  • Machine chassis or structural frame material and coating: Stainless steel and polished aluminum
  • Coil material: Aluminum with Heresite® coating
  • Drain pan material: Stainless steel
  • Waterline (tubing) material: ozone resistant plastic
  • Water pump: Delivers pressurized water
Physical Data
  • Dimensions (LWH): 864 mm × 610 mm × 483 mm; 34" × 24" × 19"
  • Mass: 67 kg (Weight: 146 lb)
Electrical Data
  • 120 V, 60 Hz, 1 phase; 1.13 kW
  • Energy cost of produced water for entering air at standard rating conditions of 29.4°C (85°F) dry bulb; 75% relative humidity is 0.71 kWh/L (2.71 kWh/US gallon)
Water Treatment (built-in)
Water is collected in a UV-protected chamber and stored in a holding tank where the water is continuously ozone-treated. Water drawn from the tank is filtered through a series of filters and flows past an ultraviolet sterilization light. No additives are needed or used. The four water treatment components are replaceable parts.
  • Water filter 1: Sediment
  • Water filter 2: Carbon/Calcium
  • Ultraviolet light (UV)
  • Ozone
Water Reservoir (built-in)
  • 45 L (12 US gallons); Stainless steel
  • May be connected to customer supplied external reservoir(s)
  • Water delivery: 3/8" hose

Picture of WFC-3 Atmospheric Water Generator for 150 L/day
WFC-3 Atmospheric Water Generator for 151 L/day (40 US gallons/day)
Picture of Plan and elevation (dimensions in inches) of the 3-Tons (cooling capacity) WFC-3 atmospheric water generator
Plan and elevation (dimensions in inches) of the 3-Ton (cooling capacity) WFC-3 atmospheric water generator
Features & Specifications WFC-3
System
  • Water production at ambient 29.4°C (85°F); 75% RH: 151 L/day (40 US gallons/day)
  • Airflow 0.57 cubic metres per second (1200 cfm)
  • 10.5 kW (3 Tons) total cooling (refrigeration) capacity
  • Refrigerant: R-410A
  • Air filter: Electrostatic, 25.4 mm (1 inch) thick
  • Air filter rack: Aluminum
  • Machine exterior material and coating: Stainless steel and polished aluminum
  • Machine chassis or structural frame material and coating: Stainless steel and polished aluminum
  • Coil material: Aluminum with Heresite® coating
  • Drain pan material: Stainless steel
  • Waterline (tubing) material: ozone resistant plastic
  • Water pump: Delivers pressurized water
Physical Data
  • Dimensions (LWH): 1,397 mm × 660 mm × 965 mm; 55" × 26" × 38"
  • Mass: 177 kg (Weight: 390 lb)
  • Sound level: 75 dBA
Electrical Data
  • 120 V and 240 V, 60 Hz, 1 phase; 2.5 kW
  • Energy cost of produced water for entering air at standard rating conditions of 29.4°C (85°F) dry bulb; 75% relative humidity is 0.40 kWh/L (1.50 kWh/US gallon)
Water Treatment (built-in)
Water is collected in a UV-protected chamber and stored in a holding tank where the water is continuously ozone-treated. Water drawn from the tank is filtered through a series of filters and flows past an ultraviolet sterilization light. No additives are needed or used. The four water treatment components are replaceable parts.​
  • Water filter 1: Sediment
  • Water filter 2: Carbon/Calcium
  • Ultraviolet light (UV)
  • Ozone
Water Reservoir (built-in)
  • 49 L (13 US gallons); Stainless steel
  • May be connected to customer supplied external reservoir(s)
  • Water delivery: 3/4" PVC tubing

Picture of WFC-10 Atmospheric Water Generator for 470 L/day
WFC-10 Atmospheric Water Generator for 530 L/day (140 US gallons/day)
Picture of Plan and elevation (dimensions in inches) of the 10-Tons (cooling capacity) WFC-10 atmospheric water generator
Plan and elevation (dimensions in inches) of the 10-Ton (cooling capacity) WFC-10 atmospheric water generator
Features & Specifications WFC-10
System
  • Water production at ambient 29.4°C (85°F); 75% RH: 530 L/day (140 US gallons/day)
  • Airflow 0.85 cubic metres per second (1,800 cfm)
  • 35 kW (10 Tons) total cooling (refrigeration) capacity
  • Refrigerant: R-410A
  • Air filter: Electrostatic, 25.4 mm (1 inch) thick
  • Air filter rack: Aluminum
  • Machine exterior material and coating: Stainless steel and polished aluminum
  • Machine chassis or structural frame material and coating: Stainless steel and polished aluminum
  • Coil material: Aluminum with Heresite® coating
  • Drain pan material: Stainless steel
  • Waterline (tubing) material: ozone resistant plastic
  • Water pump: Delivers pressurized water
Physical Data
  • Dimensions (LWH): 1,422 mm × 1,118 mm × 1,753 mm; 56" × 44" × 69"
  • Mass: 506 kg (Weight: 1,114 lb)
  • Sound level: 82 dBA
Electrical Data
  • 120 V (1 phase) and 480 V (3 phase), 60 Hz, 3 phase; 8.2 kW
  • Energy cost of produced water for entering air at standard rating conditions of 29.4°C (85°F) dry bulb; 75% relative humidity is 0.37 kWh/L (1.41 kWh/US gallon)
Water Treatment (built-in)
Water is collected in a UV-protected chamber and stored in a holding tank where the water is continuously ozone-treated. Water drawn from the tank is filtered through a series of filters and flows past an ultraviolet sterilization light. No additives are needed or used. The four water treatment components are replaceable parts.​
  • Water filter 1: Sediment
  • Water filter 2: Carbon/Calcium
  • Ultraviolet light (UV)
  • Ozone
Water Reservoir (built-in)
  • 246 L (65 US gallons); Stainless steel
  • May be connected to customer supplied external reservoir(s)
  • Water delivery: 3/4" PVC tubing

Price information
  • Prices for these machines: Free download of price-list
  • Replacement parts price list (free download)

Do you want to print the specifications?​​--Free download of specifications

Limited Warranty
  • Parts warranted against failure due to defects in material and manufacture 12 months from purchase date. Labour costs not included.

Freight and Terms
  • No minimum order requirements
  • Ex Works (West Palm Beach, Florida, USA)
  • The following items are not included so they are the responsibility of the customer: Overseas freight, Export crating; Containerization, Insurance, Customs fees, Brokerage fees, or other freight/shipping/customs related costs
  • Installation costs are not included because these depend on site specific requirements. These costs are the responsibility of the customer.
  • 65% of total price is to be paid by electronic funds transfer at time of order
  • 35% if total price is to be paid by electronic funds transfer to release completed system for shipment
  • Lead times to shipment: WFC-1 or WFC-3—allow approximately 6 to 8 weeks; WFC-10—allow approximately 8 to 10 weeks

Installation
  • Recommended installation is outdoors, bolted to a concrete pad
  • Local electrician and plumber
  • External tanks are usually lower cost if purchased locally
  • External tanks need an appropriately sized water treatment unit (for example, chlorination or ozonation; responsibility of customer)

Servicing
  • Local air-conditioning or refrigeration technician

Disclaimers
  • Operational and weather factors beyond our control may cause results to vary from specifications.
  • Specifications and prices are subject to changes without advance notice.
Copyright 2003–2021, Canadian Dew Technologies Inc.